The most common application for an IR blaster cable is to allow a device to change the channel and control the options on an external device such as a cable box, set-top box, Blu-ray player, or DVD.
This product is designed to be used with Pulse-Eight products. Please contact us to find out if this product will be compatible with a 3rd party product before purchasingIR Transmitter:
An IR flasher (emitter) is required when wanting to output (blast) an IR command to an attached device.
The emitters have a short-range output and have been specifically designed for discreet IR control. Use the supplied double-sided sticky pad to attach the bottom / flat surface of the tear-drop-shaped emitter bud directly over the IR window of the device needing control.
Please use compliant Pulse-Eight IR emitters (5V) as failure to do so might damage the product.
IR Receiver:
An IR receiver is required when wanting to accept incoming IR signals - for example, from a remote control - to distribute and control other attached devices remotely.
Use the supplied round double-sided sticky pad* to attach the back of the round casing to stick
onto a surface in a suitable place to receive an IR signal. Please use compliant Pulse-Eight IR receivers (5V) as failure to do so might damage the product.
Download Full Manual: