3.9.25 Binary Firmware Update

Modified on Thu, 2 Dec, 2021 at 9:03 AM

This firmware is available for the following products:

neo:X+ Binary
neo:XMR
neo:XSR

New Features:

(All video matrix product) Support for generating Pronto IR codes from received IR signals
(All video matrix product) Offline firmware upgrades (/admin/upgrade.htm). Note: Cannot be used to upgrade devices on older firmware versions. Please contact [email protected] if you'd like to use this feature.
(neo:X+ Binary) Setting to prevent auto-muting DSP while an audio input is selected
(All Binary video matrix) SDDP support
(All Binary video matrix) Support for 12V IR
(All Binary video matrix) Support for service tags

Changes:

(neo:X+ Binary) API command: Only enable 'always embed' support after calling /audio/enable_always_embed/true once

Fixed:

(All products) Corrected logging line when enabling/disabling mirroring
(All products) Logging could sometimes get corrupted while adding new data
(All products) Routing changes could fail if there was a problem with CEC on an output bay
(All products) Offline firmware upgrade files sometimes got rejected as invalid incorrectly
(All products) Reboot button in the admin web interface did not work
(All products) Hidden flag could not be cleared
(All products) Log got cleared after rebooting in some cases
(All products) Update network led status correctly
(All products) Overall stability improvements
(All video matrix product) Audio inputs show items that do not apply
(neo:X+ Binary) HDBaseT link test failed on first load
(neo:X+ Binary) ARC activation issues:
- Matrix could route to ARC if the TV did not respond
- Log would say 'Inactive' if the logical address if the ARC source was not set yet
- Better checks for (de)activating ARC and reporting status
(neo:X+ Binary) No more warnings when disabling ARC
(neo:X+ Binary) Disable ARC status when switching to another audio source
(neo:X+ Binary) Do not enable ARC when the TV powers on and an audio input is active
(neo:X+ Binary) LG would disable ARC again after power on
(neo:X+ Binary) Audio route was not restored when re-selecting the same video source while an audio input was selected
(neo:X+ Binary) Audio embedding would not work if the HDMI output was switched to an input that didn't provide a video signal. Matrix will now switch video to another input, if available
(neo:X+ Binary) Audio embedding sometimes got enabled when it shouldn't be enabled on HDMI outputs

Please note: You may need to clear the cache for your web browser in order to see the latest firmware features after installing this update.