4KDS Downscaler Settings

Modified on Tue, 13 Aug, 2019 at 12:23 PM

Used saved EDID after copying from a TV using mode 1
Copy EDID from a TV and save it. Switch to 0 after saving EDID
Use EDID profle 4K, HDR, 8 Channel Audio
Use EDID profle 4K, HDR, 6 Channel Audio
Use EDID profle 4K, HDR, 2 Channel Audio
Use EDID profle 4K, No HDR, 8 Channel Audio
Use EDID profle 4K, No HDR, 6 Channel Audio
Use EDID profle 4K, No HDR, 2 Channel Audio
8Reserved
9Reserved
AReserved
BReserved
CReserved
DReserved
EReserved
F    Passthrough


Do not change settings while powered on. You can change it but it will not take effect until power cycle


4KDS will always output 1080p, not even 720p.

Frame rate will not change, i.e. if 4K30 is coming in, 1080p30 goes out.


 


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article